W artykule zaprezentowano analizę systemu wykorzystującego platformę COMSOL Multiphysics. Użyto modelu Jiles-Atherton do opisu histerezy. Przeprowadzono analizę 2D wykorzystując parametry uzyskane doświadczalnie.
Słowa kluczowe: metoda Epsteina, platforma COMSOL Multiphysics, metoda elemenmtów skczonych.
Epstein frame, COMSOL Multiphysics, Jiles-Atherton model, Finite Element Method, Potential formulation
Keywords: Epstein frame, COMSOL Multiphysics, Jiles-Atherton model, Finite Element Method, Potential formulation
The previous work was to build up an Epstein frame. The measurement results and the implementation of the Jiles-Atherton hysteresis model into COMSOL Multiphysics have been published in . The objective of this work is to compare computational time using COMSOL Multiphysics with different techniques. The main goal is to reduce the software simulation time as much as possible while the accuracy of the results should not decrease. The Epstein frame has been modelled in 2D. These results will be used later in Linear Parameter Varying (LPV) [3, 16] modelling of the frequency and temperature properties of an induction machine [8, 11, 14, 19]. The Epstein frame The Epstein frame is used to measure magnetic properties of electrical steels [4, 10, 12, 18]. The building and measuring process have been published . The measurements have been performed analysing the material M250-35A produced by the ArceroMittal. During measurements, current excitation has been applied with a control mechanism to obtain sinusoidal induced voltage and magnetic flux density. Measurements have been performed applying 7 different frequencies with 8 different amplitudes. Fast Fourier Transform (FFT) have been used where every harmonic component have been removed. These filtered excitation signals have been used during the simulations, too. In Fig.1. the completed frame can be seen. Fig.1. The measurement ready Epstein frame The Jiles-Atherton model While measuring ferromagnetic materials, hysteresis phenomenon can be observed [1, 2, 9, 13, 15]. For this work, the Jiles-Atherton hysteresis model has been chosen. The necessary formulas can be found in [6, 7, 17]. The following equations have been implemented into the frame of COMSOL Multiphysics: [...]
 A. Ivanyi: Hysteresis models in electromagnetic computation, Academic press, Budapest, 1997.  A. Ivanyi, M. Kuczmann: The finite element method in magnetics, Academic press, Budapest, 2008.  A. Szollosi, P. Baranyi: Influence of the tensor product model representation of QLPV models on the feasibility of linear matrix inequality based stability analysis, Asian Journal of control, Vol. 20. No. 1, pp.531-547, 2018.  B. Koprivica, A. Milovanovic, V. Brkovic: Electrical steel testing using modified Epstein frame, International Scientific Conference, Gabrovo,18-19 November 2016.  COMSOL: Modeling hysteresis effects, Solved with COMSOL Multiphysics 3.5a, 2008.  D. C. Jiles, D. L. Atherton: Ferromagnetic hysteresis, IEEE Transaction on Magnetics, Vol. 19, No. 5, pp. 2183-2185, 1983.  D. Jackiewicz, R. Szewczyk, J. Salach, A. Bienkowskyi: Application of Extended Jiles-Atherton model for modelling the influence of stresses on magnetic characteristics of the constuction steel, Acta Physica Polonica, Vol. 125, No. 6, pp. 392-393, 2014.  D. Khamari, A. Makouf, S. Drid, C.A. Larbi: Robust Linear Parameter Varying Induction Motor Control with Polytopic Models, Serbian Journal of Electrical Engineering, Vol. 10, No. 2, pp. 335-348, June 2013.  D. Lin, P. Zhou, A. Bergqvist: Improved vector play model and parameter identification for magnetic hysteresis materials, IEEE Transactions on Magnetics, Vol. 50, No. 2, 2014.  G. Parent, R. Penin, J. P. Lecointe, J. F. Brundny, T. Belgrand: Determination of Specific Losses in the limbs of an Epstein frame using a three Epstein frame methodology applied to grain oriented electrical steels, Sensors, Vol. 16, No. 6, 826, 2016.  H. Benderradji, L. Chrifi-Alaoui, S. Mahieddine-Mahmoud, A. Makouf: Robust Control of Induction Motor with H∞ Theory based on Loopshaping, Journal of Electrical Engineering & Technology, Vol. 6, No. 2, pp. 226-232, 2011.  IEC 60404-2 Magnetic materials, Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame, International Electrotechnical Comission Std, 1996.  Ioan R. Ciric: Scalar potential formulations for magnetic fields produced by arbitrary electric current distributions on the presence of ferromagnetic bodies, IEEE Transaction on Magnetics, Vol. 50, No.1, 2014.  J. Bokor, P. Gáspár, Z. Szabó: Robust Control Theory with automotive applications, Typotex, 2012.  J. P.A. Bastos, N. Sadowski: Electromagnetic modeling by finite element methods, Marcel Dekker Inc, New York, 2003.  P. Baranyi: TP-model Transformation-Based-Control Design Frameworks, Springer International Publishing Switzerland, 2016.  P. Kis Jiles-Atherton model implementation to edge finite element method, PhD Thesis, Budapest University of Technology and Economics, 2007.  R. Kaczmarek, M. Amar, F. Protat: Iron loss under PWM voltage supply on Epstein frame and in induction motor core, IEEE Transactions on Magnetics, Vol. 32, No. 1, pp. 189-194, 1996.  S. M. Nawazish Ali, Athar Hanif, M. J. Hossain, Vivek Sharma: An LPV H∞ Control Design for the Varying Rotor Resistance Effects on the Dynamic Performance of Induction Motors, Industrial Electronics (ISIE) 2018 IEEE 27th International Symposium, pp. 114-119, 2018.  Z. Németh, M. Kuczmann: Measuring and simulation magnetic characteristics using Epstein frame, Pollack Periodica, Vol. 13, No. 2, pp. 15-26 (2018).  COMSOL Multiphysics 5.2a Release highlights: https://www.comsol.com/release/5.2a/acdc-module