Wyniki 1-1 spośród 1 dla zapytania: authorDesc:"Liwia Sozańska-Jędrasik"

Structure and phase composition of newly developed high manganese X98MnAlSiNbTi24-11 steel of TRIPLEX type DOI:

  The work presents the results of investigations of the structure and phase composition of newly developed high manganese X98MnAlSiNbTi24-11 steel of TRIPLEX type. The average density of such steel is 6.67 g/cm3, which is less than for typical structural steels by even 15%. A preliminary analysis of phase composition and structure allows to find an austenitic γ-Fe(Mn, Al, C) structure in the investigated steel with uniformly distributed ferritic α-Fe(Mn, Al) areas elongated towards the boundaries of austenite grains and numerous carbides with differentiated chemical composition and varied size. Nb- and Ti-based complex carbides are dominant in the steel. The investigations of the chemical composition of the carbides revealed in the matrix allow to identify with high probability dispersive κ-(Fe, Mn)3AlC carbides with the nanometric size of approx. 10÷160 nm, which has to be yet confirmed with electron transmission microscopy methods. Fe, Mn and Al as well as small amounts of Nb, Ti and Si are contained in such carbides. The occurrence of aluminium carbonitrides with a fraction of Nb and Ti was also revealed. The size of the above Nb and Ti carbides revealed in solid specimens in the matrix of the studied steel is between approx. 10 nm to 15 μm. X-ray diffraction examinations of carbide isolates prepared by the method of chemical dissolution in HCl showed the existence of NbTiC2 carbides in the studied steel. The diffraction examinations of solid specimens revealed, apart from austenite and ferrite, also the existence of TiC carbides and such initially classified as Mn3.6C0.4 type. Key words: high manganese steels, microstructure, phase composition, NbTiC2, TiC, κ-(Fe, Mn)3AlC.1. INTRODUCTION High manganese steels have become well established in the area of research over high-strength steels which at the same time maintain high plastic properties. Multiple new steel grades containing high contents of manganese (≥[...]

 Strona 1