Wyniki 1-1 spośród 1 dla zapytania: authorDesc:"Andrzej Uramek"

Derivation of The Planar Square Coil Litz-Wire Winding Resistance for Sinusoidal Currents DOI:10.15199/48.2019.06.19

Czytaj za darmo! »

Introduction Demand of the wireless power transfer systems (WPT) for the high quality factor planar coils is significantly increasing. It can be seen that planar coils are utilized in systems like inductive heating, EV charging, robot charging, home appliances, medical appliances, and mobile device systems [20]- [36]. The addition of the ferrite introduces ferrite core losses and increases copper losses [19]. The air-core inductor with advantages of even magnetic field distribution and relatively lower costs could be utilized in such a systems [20]. Moreover in all of these systems, the low-loss planar inductors are required in order to increase the quality factor and to transfer energy with the highest possible efficiency. The WPT coils. operate at relatively low coupling factor (typical range 0.1 to 0.4), thus, there is a presence of high circulating currents that causes additional copper losses. These losses must be reduced in order to increase the WPT system efficiency thus high unloaded quality factor coils are required.Nomenclature γ = rs √ μσω - normalized radius of the strand; δ - skin depth; μ - free space magnetic permeability; σ - copper conductor conductivity; ω = 2πf - angular frequency of the conductor current; ESR - equivalent series resistnace; I - RMS value of the coil current; Ns - number of strands in the litz wire; Nt - number of the coil turns; Li, Lj - lengths of ith and jth coil sides; Pj - the power dissipated in the conductor j-th turn (one side of the coil); Rcoil - total resistance of the coil; Rdc, Rdcm - calculated and measured copper solid round wire DC resistance; Rmeas - measured AC winding resistance; Rprox, Rproxm - calculated and measured proximity effect winding resistance of the coil winding; Rskin - skin effect winding resistance of the litz wire; il(t) - sinusoidal winding conductor current; f, fcritical - operating frequency an[...]

 Strona 1